Request quick parameter check - Rapid feedrates for 1997 Puma 200MS

[lasernerd]

Looking to confirm rapid feedrates for a Puma 200MS.

Parameter is 1420
Current numbers are
X: 10000
Z: 10000
C: 54055
B: 10000

We think my partner may have dialed down the rapid parameters when we got the machine many years ago to prevent a disaster. We've learned a lot since then and want to make sure she's running full tilt.

Any help would be very much appreciated. Our factory service center doesn't have parameter lists for machines of that vintage, unfortunately.

Similar Threads:

• Request Sanity Check of my Microwave Oven Power Supply
• Doosan puma Rapid question
• Need Help!- Daewoo Puma 240 rapid override stuck at F0 or 50%
• Daewoo Puma 200MS

[dhardt]

According to an old Parameter sheet for a PM20MS with a 16/18TC control, the parameters1420 is as follows:
X: 20000
Z: 24000
C: 54055
B: 20000

please note that these are for THIS specific machine (verify your before committing.)

[lasernerd]

dhardt, thanks so much. I guess we're way low. Now just one thing, this machine has an 18T, not TC. Is it possible this machine would have lower specs? Or just a different way to write the same thing?

Really appreciate you looking it up.