DOOSAN MX2600 ST question

Results 1 to 2 of 2

Thread: DOOSAN MX2600 ST question

  1. #1
    Registered
    Join Date
    Feb 2017
    Location
    Canada
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default DOOSAN MX2600 ST question

    Hello !

    First post here.
    Been 6 months playing with this doosan.

    I nice machine. My conpany bought a demo that was in chicago iMTS 3 years ago.
    It has been beated up by the last operator and now we did straightening maintenance to get all axis squared.
    But the B axis get out of square after a couple of weeks of work.

    My question is. Did somebody else work on that kind of machine and do you guys use it hard on roughing operation.

    How much is your average depht of cut on average material such as 4140

    thanks

    Similar Threads:


  2. #2
    Member dhardt's Avatar
    Join Date
    Feb 2013
    Location
    United States
    Posts
    788
    Downloads
    0
    Uploads
    0

    Default Re: DOOSAN MX2600 ST question

    "Did somebody else work on that kind of machine "?

    Yup.

    I work for Doosan Machine Tools America, what can I assist with?

    No longer with Doosan Machine Tools America
    darrylhardt@gmail.com


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

DOOSAN MX2600 ST question

DOOSAN MX2600 ST question