Just In Does anyone need service manuals for popular Doosan Machines? - Page 5

Page 5 of 9 FirstFirst ... 2345678 ... LastLast
Results 81 to 100 of 179

Thread: Does anyone need service manuals for popular Doosan Machines?

  1. #81
    Member dhardt's Avatar
    Join Date
    Feb 2013
    Location
    United States
    Posts
    788
    Downloads
    0
    Uploads
    0

    Default Re: Maintenance Manual Lynx 220LM

    The Lynx 220LM is very similar to the Puma 240M (which is posted in this forum)

    No longer with Doosan Machine Tools America
    darrylhardt@gmail.com


  2. #82
    Member
    Join Date
    Dec 2005
    Location
    USA
    Posts
    68
    Downloads
    0
    Uploads
    0

    Default Re: Maintenance Manual Lynx 220LM

    Darryl
    do you have any docs on how to replace spindle bearings on a puma 200B
    and besides the bearings and the oring what other parts are recommended to replace , the collar labyrinth has to be replaced .?



  3. #83
    Member
    Join Date
    Dec 2005
    Location
    USA
    Posts
    68
    Downloads
    0
    Uploads
    0

    Default Re: Does anyone need service manuals for popular Doosan Machines?

    I need service manuals for DAEWOO PUMA 200B

    Thanks



  4. #84
    Registered kbarratt's Avatar
    Join Date
    Jul 2003
    Location
    USA
    Posts
    16
    Downloads
    0
    Uploads
    0

    Default Re: Does anyone need service manuals for popular Doosan Machines?

    Do you have one for HP4000?



  5. #85
    Member dhardt's Avatar
    Join Date
    Feb 2013
    Location
    United States
    Posts
    788
    Downloads
    0
    Uploads
    0

    Default Re: Maintenance Manual Lynx 220LM

    Quote Originally Posted by DANIEL HALL View Post
    Darryl
    do you have any docs on how to replace spindle bearings on a puma 200B
    and besides the bearings and the oring what other parts are recommended to replace , the collar labyrinth has to be replaced .?
    If the labyrinth sets the preload on a tapered roller bearing AND it needs to be made larger to accommodate the new bearing's requirements, then it does need to be replaced. If needing to be altered to smaller, then "no"

    For the instructions: I have a manual for a similar machine already posted to this thread...

    page back to my post in this thread on 4-24-2015 at 3:13pm
    Use that manual, but note: the instructions and procedures are the same, but the parts are not. also...NO DOOSAN MANUAL WILL EVER TELL YOU THE PROPRIETARY PRELOAD RATIO. (When we did, customer screw ups got us sued. Preload too little makes "sloppy", preload too much makes premature bearing failure) This ensures that there is actual knowledge of bearings and their assembly, to have a repair be done correctly.

    No longer with Doosan Machine Tools America
    darrylhardt@gmail.com


  6. #86
    Member dhardt's Avatar
    Join Date
    Feb 2013
    Location
    United States
    Posts
    788
    Downloads
    0
    Uploads
    0

    Default Re: Does anyone need service manuals for popular Doosan Machines?

    Quote Originally Posted by DANIEL HALL View Post
    I need service manuals for DAEWOO PUMA 200B

    Thanks
    This machine is older than the manuals available beyond those shipped with the machine, sorry.

    No longer with Doosan Machine Tools America
    darrylhardt@gmail.com


  7. #87
    Member dhardt's Avatar
    Join Date
    Feb 2013
    Location
    United States
    Posts
    788
    Downloads
    0
    Uploads
    0

    Default Re: Does anyone need service manuals for popular Doosan Machines?

    Quote Originally Posted by kbarratt View Post
    Do you have one for HP4000?
    As pointed out on 01-19-2016 at 09:19am

    The HP 4000 is an older machine.

    I do have manuals for an HP 5100.

    Procedures are similar, but part numbers are different.

    I then posted a mechanical, electrical, and 2 troubleshooting manuals. Please refer to those post, earlier in this same thread.

    No longer with Doosan Machine Tools America
    darrylhardt@gmail.com


  8. #88
    Member
    Join Date
    Jul 2017
    Location
    United States
    Posts
    50
    Downloads
    0
    Uploads
    0

    Default Re: Does anyone need service manuals for popular Doosan Machines?

    Hello, our shop has a Puma MX2500LST.

    The milling spindle shaft cracked in the taper and in preparation for replacing the spindle, I was wondering if there is anything special that needed to be done to set the spindle orientation so both the curvic coupling and tool changer work without issue. Nothing is mentioned in my manuals.

    Thank you.



  9. #89
    Registered
    Join Date
    Jun 2005
    Location
    Croatia
    Posts
    32
    Downloads
    0
    Uploads
    0

    Default Re: Does anyone need service manuals for popular Doosan Machines?

    Any chance you can help with one information - does all Lynx 200 - 220 machines with out the patrol light , have the needed PLC ladder information to support the working of the lamps?
    The question is , does on all machines if the light is missing , only is missing the relay and the light , or does changes need to be implemented in the PLC program to make lights work if the machine did not have it when it shipped?
    ps. Any chance to get electrical diagram for LYNX 200A and B ?



  10. #90
    Member dhardt's Avatar
    Join Date
    Feb 2013
    Location
    United States
    Posts
    788
    Downloads
    0
    Uploads
    0

    Default Re: Does anyone need service manuals for popular Doosan Machines?

    To best tell you this:

    What is the machine's serial number? (found on the placard, located near the main power switch)
    What is the Electrical Hardware version? (found on the placard, located near the main power switch)

    What is the ladder version?
    Press the <SYSTEM> hard key
    Press the <PMC> softkey (depending on Fanuc model)
    Press the <PMCPRM> or <PMCCONFIG> (depending on Fanuc model)
    Press the <TITLE> softkey
    There is a field: PROGRAM DRAWING NUMBER (it is in the middle of the page)
    It contains a LONG alphanumeric sequence, separated by a comma or colon...and then another alphanumeric sequence
    I need the WHOLE code...everything in that field.


    From this information, I can see why the machine does anything and everything related to IO

    No longer with Doosan Machine Tools America
    darrylhardt@gmail.com


  11. #91
    Yomauindia's Avatar
    Join Date
    Jul 2018
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by dhardt View Post
    At Doosan, we have a wide variety of Installation Manuals, Service Manuals, Alarm Manuals, and Technical Documents that simplify the troubleshooting, diagnosing, and repair of our machines.

    These manuals are available to the general public.

    There are way too many to post them all here... (though, if enough people request a specific manual, I can post some of the smaller ones...larger ones will exceed this site's limitations)

    The attached screen capture shows a minuscule sampling of the available documentation.
    Hello Sir, can you share for Doosan dooturn 3 mchine

    Sent from my Redmi Note 5 using Tapatalk



  12. #92
    Member dhardt's Avatar
    Join Date
    Feb 2013
    Location
    United States
    Posts
    788
    Downloads
    0
    Uploads
    0

    Default Re: Does anyone need service manuals for popular Doosan Machines?

    Quote Originally Posted by Yomauindia View Post
    Hello Sir, can you share for Doosan dooturn 3 mchine

    Sent from my Redmi Note 5 using Tapatalk
    There are no Service Manuals for the MechaTec versions of old Doosan products, sorry.

    No longer with Doosan Machine Tools America
    darrylhardt@gmail.com


  13. #93
    Registered
    Join Date
    Apr 2012
    Location
    Australia
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Does anyone need service manuals for popular Doosan Machines?

    Hi Darryl
    I am a TAFE Teacher in Sydney
    I have a Doosan Lynx300M
    If you have a manual. Please post one.
    Also any useful training material regarding this machine would be appreciated

    Thanks
    Dave



  14. #94
    Member dhardt's Avatar
    Join Date
    Feb 2013
    Location
    United States
    Posts
    788
    Downloads
    0
    Uploads
    0

    Default Re: Does anyone need service manuals for popular Doosan Machines?

    Other than the one's sold as actual parts, the only manual I have for a Lynx is the Installation Manual. (Attached)

    Attached Thumbnails Attached Thumbnails Does anyone need service manuals for popular Doosan Machines?-lynx220_l220mise951-pdf  
    No longer with Doosan Machine Tools America
    darrylhardt@gmail.com


  15. #95
    Registered Louis_amecpro's Avatar
    Join Date
    Sep 2018
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Does anyone need service manuals for popular Doosan Machines?

    DHardt,

    We are in need of any/all manuals for Doosan S310N (Serial number LSA1226). Right now, we have only the electrical manual and Fanuc controller manual for this machine.

    Local dealer tells us the manuals are no longer available for sell.

    I know the machine is old but I hope you can help getting manuals in any way.

    Regards,

    Louis Gauthier



  16. #96
    Registered
    Join Date
    May 2015
    Location
    Usa
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default

    Hi , I'm also looking for a manual for
    Daewoo DMV3016L for info on machine teardown for a spindle removal/installation.
    Thanks, Cliff




  17. #97
    *Registered User* T_clark's Avatar
    Join Date
    Sep 2018
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: Does anyone need service manuals for popular Doosan Machines?

    Hi I was wondering if I could get ANY information you have on a Doosan HP4000II? anything would be greatly appreciated!

    Thanks!



  18. #98
    Member
    Join Date
    May 2016
    Location
    United Kingdom
    Posts
    526
    Downloads
    0
    Uploads
    0

    Default Re: Does anyone need service manuals for popular Doosan Machines?

    Hi D Hardt
    Do you have the programming manual for a Lynx 220LMS
    We have the others but are missing this



  19. #99
    Registered
    Join Date
    Mar 2018
    Location
    Somalia
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default

    Hello i need doosan puma3100ly manual.

    I need to remove morse center and i m not sure how.



  20. #100
    Member dhardt's Avatar
    Join Date
    Feb 2013
    Location
    United States
    Posts
    788
    Downloads
    0
    Uploads
    0

    Default Re: Does anyone need service manuals for popular Doosan Machines?

    Quote Originally Posted by MetaldesignSLO View Post
    Hello i need doosan puma3100ly manual.

    I need to remove morse center and i m not sure how.
    This is not something that requires a manual, so it is not in any...

    There is a spanner nut between the Quill and the thrust piston.

    On a machine with a Dead Center, the spanner is mounted on the quill and needs to be turned to go toward the thrust piston to push the quill out, off of its face.

    On a machine with a Live Center, the spanner is mounted on the Thrust piston and needs to be turned to go toward the quill to push the quill out, off of its back.

    No longer with Doosan Machine Tools America
    darrylhardt@gmail.com


Page 5 of 9 FirstFirst ... 2345678 ... LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Does anyone need service manuals for popular Doosan Machines?

Does anyone need service manuals for popular Doosan Machines?