Does anyone need service manuals for popular Doosan Machines?

[youngdoo]

I notice that you are in Korea. Doosan Korea has the same (and more) manuals, written in Hangul.
Would you rather have those?

Yes. Thank you

[dhardt]

The MX, is it a 2000, 2500, 3000 series or a 1600, 2100, 2600, 3100 series?

[youngdoo]

I notice that you are in Korea. Doosan Korea has the same (and more) manuals, written in Hangul.
Would you rather have those?

The company is repairing Doosan machine, but the manual is not enough. I have repaired a lot with your manual but I want to study more machine tools.

[youngdoo]

The MX, is it a 2000, 2500, 3000 series or a 1600, 2100, 2600, 3100 series?

Mx 2500,2600 Please

[dhardt]

Mx 2500,2600 Please

Those are two different series of machines.

What is the model that you are needing?

[youngdoo]

Those are two different series of machines.

What is the model that you are needing?

I am looking for a manual because of my lack of ability to repair mx, vtr, and st35gs of machine.

I need an Mx2600.

[dhardt]

Trying to find it, now.
Understand, please...I can't read Hangul.

It is required, if I wish to get the right documents, that I get the assistance of someone who does read Hangul, but they have to stop their job and come to my desk each time I try to find the files...this might take some time.

[youngdoo]

Trying to find it, now.
Understand, please...I can't read Hangul.

It is required, if I wish to get the right documents, that I get the assistance of someone who does read Hangul, but they have to stop their job and come to my desk each time I try to find the files...this might take some time.

Sorry. English is fine, too.

[dhardt]

The Korean version ended up being 91MB (way too large to post here.)
The English one is 14.3MB...(still too large) so I reprinted it in sections.

Pages 1 - 45

- - - Updated - - -

46 - 90

[dhardt]

91 - 135

- - - Updated - - -

136 - 180

[youngdoo]

thank you

[ktmktmman]

NHP 5000 if possible. Thanks

Sent from my SM-G965U using Tapatalk

[HawgWiiild]

This Lynx 220 installation manual has the geometry adjustments near the end.

Would you have the ladder diagram for a Lynx 220?

[dhardt]

Would you have the ladder diagram for a Lynx 220?

Hundreds of them.

Which version are you needing?
If I don't have yours, you can send me a download of it, I can print it to PDF...

To find the ladder version?
Press the <SYSTEM> hard key
Press the <PMC> softkey (depending on Fanuc model)
Press the <PMCPRM> or <PMCCONFIG> (depending on Fanuc model)
Press the <TITLE> softkey
There is a field: PROGRAM DRAWING NUMBER (it is in the middle of the page)
It contains a LONG alphanumeric sequence, separated by a comma or colon...and then another alphanumeric sequence
I need the WHOLE code...everything in that field.

[dhardt]

NHP 5000 if possible. Thanks

Sent from my SM-G965U using Tapatalk

I have an NHP 6300 Service manual. Part numbers are definitely different, but processes are similar.
It is 43.2 MB
Too large for this site. Send me an Email with this request repeated, and I will send a link to my Google Drive site for file transfer

I also have an Alarm Manual for any NHP or NHM with a 30i Series control, but it is 25.6 MB (too large for here, as well)

[dhardt]

I'm going to try to add a link to the Google Drive. Can someone verify if it works, please?
https://drive.google.com/file/d/1ixD...ew?usp=sharing

[PNaedele]

I'm going to try to add a link to the Google Drive. Can someone verify if it works, please?
https://drive.google.com/file/d/1ixD...ew?usp=sharing

It works.

[dhardt]

thank you.

[dangilbert]

Hello Darryl, I am wondering if you (or anyone on this list) has a manual for a Puma 8HC-3A ~1996 from DAEWOO, now Doosan. I have the operator's manual for the 16T FANUC control on the machine. I have run into a bunch of questions that are not answered in the FANUC manual, and am told that I need to ask the manufacturer. When I have questions about the FANUC controller, FANUC is awesome, but if it involves the operation of the spindle or tailstock I am told to contact the manufacturer of that part of the machine.

[lstoeckl]

Hi,

thank you for providing the maintenance manual for the Puma 240M - it was of great help.

Do you also have a maintenance manual for Puma 2600LM and Puma 3100Y, year of manufacture 2012?

Thanks in advance!