Well thanks for all the help guys...... it was a bad card, $800 later it's running again.
Short version, I get a time out error for the parts catcher, I can manually make it work by activating each side of the air valve that controls it but best I can tell the machine is trying to activate both sides at the same time, any idea of where to look for a problem? Machine is about a 1997 model with the Mitsubishi control.
Similar Threads:
Well thanks for all the help guys...... it was a bad card, $800 later it's running again.
Hi Dent,
This forum the daewoo/doosan page doesn't get to much traffic. It might help next time to somehow get your post in another place that has more traffic in hopes for more responses. Sorry I wouldn't have been any help.
Brent
Dent,
If ever needed, I work for Doosan Infracore America, as a Field Service Technician. I also answer calls on our 24-hour help line.
You can reach New Jersey Service at: 1-888-323-9660 (ask for Service)
The 24-hour help line is: 1-888-9DOOSAN (1-888-936-6726)
from 8 AM to 6 PM Eastern Time you will get the New Jersey Office
from 6 PM to 12 AM Eastern Time you will get the California Office
from 12 AM to 6 AM Eastern Time you will get the Factory in Korea
from 6 AM to 8 AM Eastern Time you will get a service technician's cell phone
You can call my desk phone between 8:30 and 5:30 Eastern Time: (973) 618-2461
You can call my cell phone 24/7 (during office hours, try my desk first) at (973) 803-9479
Lastly, my email is darryl.hardt@doosan.com
If you need drawings or research done to find an answer, my cell number only has the information that is in my head (limited) But if you need troubleshooting advice or help checking I/O, circuitry, or ladder of your machine...I'm pretty handy over the phone...
To anyone reading this, these numbers are available to all. Let us know if we can be of assistance...
No longer with Doosan Machine Tools America
darrylhardt@gmail.com