I have recently started to use parametric programming, but I came
across certain problems.
Namely on EAGLE 25, EAGLE 32 turn-mill Y-axis and EAGLE 32 MINITURN all
with SYNTEC 900T controller I have problem with "IF,WHEN,WHILE ..."expressions
(they accept other expressions containing variables). For example each
time I program:"IF[#1 EQ 1]GOTO5;" machine displays alarm- "syntax error". I
have no idea what's wrong, because these conditional expressions are
accepted on our other machines eg. Hyunday-Kia Kit 450 with FANUC or
SERO-TURN with MITSUBISHI controller. I found nothing, that could help in Syntec operator's manual.
I would be really grateful for any suggestions.