Syntec 900 M macro and probing

[PROBE]

I've been asked to install Renishaw probe on Fulltech machine with Syntec 900M control. Unfortunately machines programming manual only mentions that G65 (macro call) and G31 (skip) functions exist, but no further information is available. I tried to find Syntec's web site - no success.

Please help !!!

[NCDataServices]

Probe,

Renishaw Probe Macros are available from Renishaw for Fanuc controls
and would also work with other controls that are similar to Fanuc. If the
CNC supports external macro subroutines then the Renishaw macros should
be adaptable to your CNC. We have supported these macros on several
different milling/routing machine tool brands using standard postprocessor
syntax.

NC4EVER,
NCDataServices

[PROBE]

Probe,

Renishaw Probe Macros are available from Renishaw for Fanuc controls
and would also work with other controls that are similar to Fanuc. If the
CNC supports external macro subroutines then the Renishaw macros should
be adaptable to your CNC. We have supported these macros on several
different milling/routing machine tool brands using standard postprocessor
syntax.

NC4EVER,
NCDataServices

NC4EVER,
Thank you for response. The problem is not the meauring macro routines (either Renishaws or written by myself). I am trying to find what Syntacs macro "language" is.


PROBE