Siemens (sinumerik 802C base line)

[Afzal]

I have Knuth VBZ900 with Siemens control (sinumerik 802C base line)
I need the following:


To change the program from DNC mode to machine memory mode, to run machine from its own memory.

When we insert M01 in program our machine is not Stop, please guide us in this control what is the method of optional Stop.

[Switcher]

I run Siemens 840D, & all the machines I've ever ran, have a button on the control panel, to activate the "M01" option.

If the button isn't on, the cnc control will skip over the "M01", while it's running the g-code.


.

[mohsen]

hi afzal ,send me the last back up of yor MD ,i will fix it and send it back.
P.S. your self can fix it easily.just go MD file.
mhafizallahi@yahoo.com

[yaesu747]

You only have to go to Program and Select a program in the memory of the control presing Select.
Saludos