Need Help!- Bendix Dynapath 10 documentation needed

[JerryJonz]

I have a Bendix Dynapath 10 (pre Delta) with some blown resistors on the power supply board. Does anyone have any documentation so I can find the values, or a board you could look at the resistor and tell me the color code?
Any help would be appreciated.

[JerryJonz]

The burnt resistors are R21, 38, 39, 69.
The board number is 3735744.
Thanks Jerry

[JerryJonz]

Anyone know whe else I could look?

[convolvatron]

i actually have a copy of the schematics. send me a message if you're still looking and we'll work something out

[JerryJonz]

I purchased a DynaPath 40 MPU control.
It came with cut cables and no switches.
Does anyone know where I can get parts and cables for this.
Anyone have a picture of the CRT panel so I can see what
the switches look like?
Any help appreciated.

[nybuxt]

Originally Posted by convolvatron i actually have a copy of the schematics. send me a message if you're still looking and we'll work something out

I have a system 10 Dynapath I'm looking to replace with a PC based control like LINUX and have been told that I need an interface to do this. I have no wiring schematics for the machine however, what would I need to do and are schematics available?