Need Help SANYO SUPER U DEC Servo Motor

[vegarola]

Im looking for the Technical Specification Sheet for thte SANYO Denki SUPER U. DC SERVO MOTOR. Type : U718-012E18 (180W, 75V, 3.4 A, 3000 RPM).
Can anyone tell me where to find it or if you have a copy send it to me.
Thanks

[Ajax-oz]

Hi Vegarola,

I know this motor it is a very good and reliable motor.

Sorry but I can't give you any specs or details. I would recommend sending an email to support at 'SANYO Denki' and see if they will give you some information about it.

What I can tell you is that it is use in one of Yamaha's Surface mount machines (In US sold as a Phillips)
I can't even say which model machine it is from. But they are all very reliable. I don't remember ever replacing one when I was a service tech of these machines.

AJ

[Al_The_Man]

What other info do do you need on it? e.g. Torque?
Is it a DC brushed motor?
Al.

[marting]

Hi to all, I know that this thread hasn't been active for quite a while but I have 3 of the above mentioned servos and another slightly larger (U730-012E 18 --300Watts) and require some details, particularly encoder data and termination. I've tried to search the web but to no avail, probably because they have been outdated or something. As already described, these are very relyable servos and would like to utilise them in my 2nd CNC since these are equipped with 1000ppr encoders. Does anyone have any information about the encoders type E681000C30?
Thanks
marting