Look at CNC USB controller
IŽll just bild my own cnc Controller.
In RC-network Es ist vollbracht - CNC- Umstieg von DOS auf Windows.
Happy New Year
I am in the process retrofitting an old cnc mill and will be using mach3 software with it. I am thinking about building my own control and was wondering if anyone else has attempted this and if anyone has any plans for one or knows where I can find some plans?
Mach3 is a machine controller. Exactly what are you wanting to build?
No i have bild my own Controller also CNC Usb and the Software iŽll also have from him.
The planes off it, also on CNC USB controller.
Its a nice controller and you can also use for Mach 3.
My Englis is not so well
As Matt says, Mach IS a controller?
If you want to integrate an external configurable motion controller and build the machine I/O & operator panel etc.
Dynomotion is an option, you can use Mach or its own front end.
Depends what extent you mean by 'building your own control'?
CNC, Mechatronics Integration and Custom Machine Design (Skype Avail).
Logic will get you from A to B. Imagination will take you everywhere.
planet cnc is good