I am a novice in this area and i want to by CNC 3 Axis Stepper Motor Driver Controller Board TB6560. Will i be able to run Mitsumi M49SP-2K stepping motors with this controller? I get these motors out from Samsung Laser printers..

[SPECIFICATIONS]
M49SP-2K (MITSUMI - PRODUCTS - PRODUCTS INDEX)
Rated Voltage DC 24V
Working Voltage DC 21.6~26.4V
Rated Current/Phase 1A(PEAK)
No. of Phase 2 Phase
Coil DC Resistance 4.6Ω
Step Angle 7.5º/step
Excitation Method 2-2 Phase excitation(Bipolar chopping driving)
Insulation Class Class E insulation
Holding Torque 134mN·m Pull-out
Torque 100mN·m/1100pps
Pull-in Torquen 102mN·m/250pps
Max. Pull-out Pulse Rate 2150pps
Max. Pull-in Pulse Rate 430pps

Thanks!