| | |
Hello I am planning to convert a 1983 Hitachi-Seki HC-500 horizontal machining center from a fanuc control to a more modern pc based control and I was thinking that I might use mach3 software.This aplication will recuire the pc and software to control multiple axis's and functions such as tool changes and pallet changes this will be a very interesting project
Sounds highly I/O intensive!
How do you plan on handling all that I/O, it may be worth looking at an external PLC to handle it all.
Al.
Last edited by Al_The_Man; 11-14-2010 at 12:47 PM.
CNC, Mechatronics Integration and Custom Machine Design (Skype Avail).
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Posting Permissions
| | |
LinkBack URL
About LinkBacks
