I am about to start on getting this SALVIGING P4 Panel Bender machine, =
which sits on for years but looks in great condition imported to Sri =
Lanka ( in Asia) couple of years a gao from US.
It is running on FAGOR 8025 GP
I am missing any Information it has on the PLC part of it can any body =
please enlighten me on the whole set-up.
I just saw when the controller boots it goes through self diagnostics =
and show 'Test passed' that sounds like a good sign ;-)
1. Good Explanation on what the PLCis doing there and where to look for =
any documentation on it.( I have all the manuals for FAGOR )
2, What precautions do I need in getting started in trying to get the =
Axis Homed etc.
3. How the DNC arrangement for the FAGOR and what sort of stuff =
avaialble to get me going there too.
I am planning to check all the parameter settings etc as per the Manuals =
once I go there to begin with.
leaving this machine un-attended is a Crime and it will definetely open =
up lots of opoortunities for us as a CNC services company ( ONLY) in Sri =
Lanka for such work as well as pushing SALVIGINI as a brand here.
We sell DMS machines form US with FAGOR( One machine is in order a =
Looking forward to your assistance
The Fagor PLC programming is by simple mnemonics, you need to get hold of the PLCI manual, they normally have it on the web site, I believe.
CNC, Mechatronics Integration and Custom Machine Design (Skype Avail).
“Logic will get you from A to B. Imagination will take you everywhere.”