I am building a CNC bending machine using one of these controller cards, and having some issues with getting a c++ program to communicate with it correctly. I was wandering if anyone had any experience with this card and could offer any tips. Their support only gave me an example to play with card registers, if I run my program in the ACRView tool they (the motors connected to it) spin, so I know it isnt a hardware problem. I just cant seem to get my c++ app to do anything with the motor. Any help greatly appreciated. Thanks!
Andy 'Fish-Guy' Kellett
I have not used C++ with the Acroloop cards, but have you tried Parker support?
There is not many (if any) of the original Acroloop team around now as far as I know.
But if you get stuck, try Carl Pavitch if he is still in the MN plant, he may help.
I assume you got the C++ Class Manual from the legacy site?
Last edited by Al_The_Man; 05-03-2007 at 02:03 PM.
CNC, Mechatronics Integration and Custom Machine Design (Skype Avail).
“Logic will get you from A to B. Imagination will take you everywhere.”