Parker-Hannifan ACR 1505 PCI Card

[FishGuy876]

Hello =)

I am building a CNC bending machine using one of these controller cards, and having some issues with getting a c++ program to communicate with it correctly. I was wandering if anyone had any experience with this card and could offer any tips. Their support only gave me an example to play with card registers, if I run my program in the ACRView tool they (the motors connected to it) spin, so I know it isnt a hardware problem. I just cant seem to get my c++ app to do anything with the motor. Any help greatly appreciated. Thanks!

Andy 'Fish-Guy' Kellett
akellett@rosenbergerna.com

[Al_The_Man]

I have not used C++ with the Acroloop cards, but have you tried Parker support?
There is not many (if any) of the original Acroloop team around now as far as I know.
But if you get stuck, try Carl Pavitch if he is still in the MN plant, he may help.
cpavich@parker.com
I assume you got the C++ Class Manual from the legacy site?
Al.