I am putting together a CNC machine for woodcarving. I got everything together using a "d11983" control card. When I hook it to a computer I see a disk icon and inside are "EasySuite" and "GO! Bridge" file transfer programs. I downloaded EasySuite to a PC and GO! Bridge to a Mac. Neither computer could find the control card to allow me to send a G-code file to it. The "Smart Saw" person replied to my question with "The breakout board makes the connection between the cnc and mach 3 software." I do not understand what that means.
Does anyone have an idea what I should do next?
Similar Threads:
- G0704 stock spindle control board to mach 3 via C32 board.
- Need Help!- Home switch for CNC 3020T- with a Spindle Control Board, JP-382A and JP-1482 Board
- Need help where to find CRT Board for R2E4 Mill
- Need help where to find CRT Board for R2E4 Mill
- find a best way to cut card board about 24 to 50 pts
Is this the board you have?
https://www.aliexpress.com/store/pro...692488084.html
It should have came with USBCNC, which I think is some chinese knockoff control software.
I've never heard of EasySuite or Go Bridge??
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Maybe contact the seller for instructions.
Jim Dawson
Sandy, Oregon, USA