how to use berger lahr twin view TLC controllers


Results 1 to 1 of 1

Thread: how to use berger lahr twin view TLC controllers

  1. #1
    Registered
    Join Date
    Sep 2017
    Posts
    0
    Downloads
    0
    Uploads
    0

    Default how to use berger lahr twin view TLC controllers

    Hi,

    sorry if i picked the wrong forum, i'm new here.

    i picked up a used 2axis machine that has 2 berger lahr vrdm 3913 motors attached to two controllers:

    1x TLC 611 F
    and
    1x TLC 411 F
    they are connected by can-c cable. (see picture)

    question is what would be the best way to control these and which software would you recommend, ideally something under linux?

    it seems that currently there is some fixed program burned in that i would need to deactivate to attach a pc.
    but from reading the TLC manual ( https://download.schneider-electric....ference=TLC61x )
    it is first of all unclear to me how you would actually control this from a PC



    Similar Threads:
    Attached Thumbnails Attached Thumbnails how to use berger lahr twin view TLC controllers-tlc-jpg  


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

how to use berger lahr twin view TLC controllers

how to use berger lahr twin view TLC controllers