Something like this?
https://www.ebay.com/itm/Intel-i5-29...QAAOSwqklZihDB
Note that I haven't tried one of these.
I have recently rebuilt a machine, and am on a roll! Electronics (4 Gecko 251X, a generic BOB, 36V power supply, and a UC-100 usb dongle) are all tucked away in a new enclosure. Cable chains keeping everything tidy, etc.
Now my main grief comes from this bulky full tower PC controlling it. I saw a slick one box, touchscreen Raspberry Pi thing on a YouTube video. Whole thing was the size of my existing electronics box. Problem is that it won’t run my UCCNC software (or even LinuxCNC). A quick google shows that a Pi based system is still VERY experimental.
So, anybody have a cool solution they want to share? Is there a way to piece together a cool little dedicated computer to run my controller software (that won’t break the bank)?
Sent from my iPhone using Tapatalk
Similar Threads:
Something like this?
https://www.ebay.com/itm/Intel-i5-29...QAAOSwqklZihDB
Note that I haven't tried one of these.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
My main CNC computer died yesterday. An emergency conversion resulted in using a NUC computer:
https://www.newegg.ca/Product/Produc...82E16856102143
So far REALLY good results!
My Build: http://www.cnczone.com/forums/diy-cnc_router_table_machines/113711-my_build_-_many_thanks.html
I am running PathPilot on this system: AMD GizmoSphere + IBOB2, Denford Software & Machines ? View topic - NovaTurn Servo retrofit AMD Gizmosphere iBOB2 PCIe x1
Hope this helps,
Iron-Man