USB BOB

[imitheo]

Hello, first post around here. I'm searching for a USB Interfaced CNC Controller Board for 4 axis or 5 axis, if it's 5 better, but i can't find one, can you guys help me with this issue ?

[imitheo]

bump

[ger21]

For what software?

[imitheo]

It doesn't matter, just need the BOB

[ger21]

A breakout board is used to provide terminal connections for a parallel port.
There's really no such thing as a USB breakout board. What you probably want is a USB motion controller.
Some motion controllers have terminals on the boards themselves, and others have ports, which require additional breakout boards.
Most motion controllers only work with specific software, so you have to use the software that they are designed to work with.
There are 4 and 5 axis motion controllers available for all the common control software options.

[asuratman]

The one like this :

[imitheo]

A breakout board is used to provide terminal connections for a parallel port.
There's really no such thing as a USB breakout board. What you probably want is a USB motion controller.
Some motion controllers have terminals on the boards themselves, and others have ports, which require additional breakout boards.
Most motion controllers only work with specific software, so you have to use the software that they are designed to work with.
There are 4 and 5 axis motion controllers available for all the common control software options.

I see.. So i am indeed searching from the wrong thing :/