Need Help! Anilam 6000M control


Results 1 to 5 of 5

Thread: Anilam 6000M control

  1. #1
    Registered
    Join Date
    Mar 2017
    Location
    Australia
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Anilam 6000M control

    I am in need of some know how!
    No sure where to start, the controller on cnc mill Quantum S1000D with Anilam 6000M control has a problem it starts up and go to the menu when I select any of the three choices it goes in and freezes up, I can not go back or do anything and the word halted is in the command bar. Any ideas what I should do will be greatly appreciated.
    I have posted a video of the startup.


    Sent from my iPhone using Tapatalk

    Similar Threads:


  2. #2
    Registered
    Join Date
    Mar 2017
    Location
    Australia
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Anilam 6000M control

    Quote Originally Posted by FranschTech View Post
    I am in need of some know how!
    No sure where to start, the controller on cnc mill Quantum S1000D with Anilam 6000M control has a problem it starts up and go to the menu when I select any of the three choices it goes in and freezes up, I can not go back or do anything and the word halted is in the command bar. Any ideas what I should do will be greatly appreciated.
    I have posted a video of the startup.


    Sent from my iPhone using Tapatalk
    Anilam 6000M control-img_5005-jpg



    Sent from my iPhone using Tapatalk



  3. #3
    Registered
    Join Date
    Jan 2013
    Location
    USA
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default Re: Anilam 6000M control

    has the machine been running recently? Normally, when you get to the screen pictured, you have to reset the servo... ( estop out then press servo reset) then press the f-key for home to home the machine, then you will get the manual screen, and can go into the programs... dave



  4. #4
    Registered
    Join Date
    Mar 2017
    Location
    Australia
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Anilam 6000M control

    Thanks Dave
    I have been away and working on other projects,
    I tried to reset the servo but no response, I have found that the drives have a power fault light on and SH2 lamp on each drive. Any ideas how to go about this?Anilam 6000M control-img_5455-jpg


    Sent from my iPhone using Tapatalk



  5. #5
    Registered
    Join Date
    Jan 2013
    Location
    USA
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default Re: Anilam 6000M control

    Check to see if you have 24vdc for the e-stop and limit switch circuit... then check all limit switches, for a stuck switch or bad wire connection... dave



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Anilam 6000M control
Anilam 6000M control