- Somab Transmab 400 + NUM 720 B
-
Registered
Somab Transmab 400 + NUM 720 B
Hello.
I dont know if this is the good place for asking some questions about the Somab Transmab 400 + NUM 720 B.
We are looking for the first CNC Turning machine.
And we like the Somab Transmab 400 this machines is operate on the software NUM 720 B.
The turning machine has one problem...
The battery off the machine is dead, because the machine is a long time out off business.
And then are all parameters and the frequency are out off the machine.
The profit is that all the papers with this information is with the machine.
Now is that 1 job watch a lot off time costs.
That is not a problem for me.
But my question is what your experiences are with the Somab Transmab 400, and the controle software NUM 720 B.
Thanks for your replays!
Similar Threads:
-
-
Registered
Anyone?
Verstuurd van mijn HTC One V met Tapatalk
-
Registered
Battery is just for part programs. The parameters are not in RAM memory.
-
You should probably contact SOMAB directly at commercial@somab.fr or by phone + 33 4 70 35 15 90.
Marcus Minor
Application Engineer - ArtClip3D Software
ArtClip3D | 3D CNC Software for Router - Wood Carving Software - V-Carving - Signmaking
-
Registered
Thanks for teh repleys!
I will contact somab next week!
Verstuurd van mijn GT-P5100 met Tapatalk
-
Member
Re: Somab Transmab 400 + NUM 720 B
Good morning, Zuid.
I would like to know if you could send me some documentation of the somab lathe, I bought one and have no documentation at all.
Thank you
- Somab Transmab 400 + NUM 720 B
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules