Need Help/Advice For DNC Setup

[SMR 510RR]

We are trying to send programs to 4 Haas machines from 4 computers. The hard part is that each of the computers is only used by one person but we all share the machines depending on what we are working on. We would like to be able to send programs to any of the machines from any computer.

Here is all the tech info:

All machines are RS232

All computers are already networked with a data server

We dont need to send programs back to the computers very often if at all

We dont need to drip feed to the machines

We would like to do this for as little money as possible (under $1000 if not lower)


I am thinking we should go with a network setup with a box controlled by one of the computers that could be remotely controlled by any of the other pc's. I am having a hard time determining exactly what we need and finding software that is reasonably priced.

Thanks for any help in advance.
SMR 510RR