RS 232 communication using LABview for modem


Results 1 to 3 of 3

Thread: RS 232 communication using LABview for modem

  1. #1
    Registered
    Join Date
    Feb 2007
    Location
    Malaysia
    Posts
    1
    Downloads
    0
    Uploads
    0

    Unhappy RS 232 communication using LABview for modem

    hye..i'm a newcomer here and i really need this community help. i'm learning how to communicate with RS 232 modem.how to get the data from RS232 modem...i'm using LAbview basic serial read and write VI. i'm using the AT command but the reponse is the same as the AT command..how to convert the data we get from the modem to the info that we want which is i want the info about the modem..

    Similar Threads:


  2. #2
    Registered
    Join Date
    Sep 2014
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: RS 232 communication using LABview for modem

    hi my firend
    if you want use labview for comenionation with another thing you should :
    1- install labview
    2- install real time
    if you want continuance i can help you



  3. #3
    Community Moderator wendtmk's Avatar
    Join Date
    Dec 2005
    Location
    USA
    Posts
    591
    Downloads
    0
    Uploads
    0

    Default Re: RS 232 communication using LABview for modem

    I hope he figured it out. His post was from seven years ago.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

RS 232 communication using LABview for modem

RS 232 communication using LABview for modem