Need Help! Cutting woven cloth

Results 1 to 3 of 3

Thread: Cutting woven cloth

  1. #1
    Registered
    Join Date
    May 2013
    Location
    South Africa
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Cutting woven cloth

    Hi all
    Please help me this is my first post,dont even know if i am in the right place.
    We bought an Ultra sonic knife to cut carbon fiber,kevlar,carbon/kevlar hybrid and glass all raw cloth.
    My knife does not seem to do the trick to cut these.The moment i start cutting i loose vacuum and the strands of the material starts pulling apart without being cut.

    Similar Threads:


  2. #2
    Registered
    Join Date
    Jul 2012
    Location
    australia
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default

    use a masking tape where you are cutting both sides of the matt and cut within tha taped area.



  3. #3
    Member
    Join Date
    Apr 2012
    Location
    South Africa
    Posts
    141
    Downloads
    0
    Uploads
    0

    Default Re: Cutting woven cloth

    did you come right with the cutter ?



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Cutting woven cloth

Cutting woven cloth