Could you please email me a copy of Ncstudio Upgraded V5.5.60 (ENGLISH) SET UP Version
I received the same requests for this Ncstudio Upgraded V5.5.60 (ENGLISH) SET UP Version,
So if your machine has the same problem with below friend's, please go for download this Software in attachement.
Softare Name:Ncstudio Upgraded Version V5.5.60 (ENGLISH)
Wish this will help you!
i have here now a cnc router from china
but it is not working.
i have install the software from nc studio i think at the good way.
I installed the software and it found the pci card correctly.
I turned on the cnc and then opened the ncstudio software, once i did that the X-Y-Z Axis started to move by them selfs.
when they reached the limit switch's they still continued and started to make a grinding noise so i tund off the main power to the cnc.
when i looked at the software it had an error "limit switch on".
so i think i have bad version of ncstudio
please help me with this
I had sent Ncstudio5.4 to your eamil
firstname.lastname@example.org,pls kindly check and installed.
Wish this help you,
CNC Router Laser Cutting Machine CNC Engraving Machine-XYZ Technologies Limited
can anyone tell me where to download the latest version of ncstudio please?
hi, i have the same problem so i tried to instal nc studio 5.560 but it crashed due to a bug. if any one knows a fix i would be very gratefull.
Sunny Sun http://www.omni-cnc.com
I had the same problem, i install the program and open it i try to engrave some works the spindle work but the Z X Y don't work the head don't move to x , y or z
so pleae help me i am waiting for your reply
My pc just died in the middle of a new job, I just tried to reload NC studio to find the disk is corrupted, does anyone know if there is a download for this software anywhere
does anyone still have a link for the latest version of NC studio. I can't find one anywhere
I have version 5.5.6. It recently came with my cnc. I've found its as 'buggy' as v5.5.4. All error messages come up in hieroglyphics etc...
Anyone have a newer or better version?
Cafe Racer and Custom Bike Builds