Need Help!- NEE - AMC Control on Onsrud Router

[MarkT]

I am working with a company who purchased a circa 1999 Onsrud Router with an NEE AMC control. I do not work on these brand controls or machines and the company advised me they are getting poor response from the manufacturer for assistance. Does anyone have an electronic document on this control? Operators type reference. Essentially they need to know how to home the control, call over programs, edit, etc.
Any help would be great! Email to ntek1@aol.com

Thanks!

Mark T.

[jaydawg]

I don't have any electronic documentation for the AMC but I an running a 2004 Onsrud with AMC controller.

Homing the machine is done during startup. Pull the e-stop and the controller will fire up. Once it's gone through it's strartup procedure it should prompt the user to datam the machine. At that point the machine should datam all axis.

Transferring NC files is done from a pc networked to the machine. I use Cimco as an editor and transfer program. Once the program is loaded into the machine it can not be edited.

Feel free to email me if you want to talk more. jason (at) mwdsgn.com

[MarkT]

Thanks Jason - I was able to work with them and develop processes to home the machine, call over programs, etc. There was limited information on this control available online.
Mark T.
www.cnccustomservices.com