Need Help!- Chinese CNC Router Problem XJ-6090 PLZ HELP :(

[6bx]

I currently bought a CNC Router from China it was from xyz-tech the model is XJ-6090. i unpacked the router and installed the software and PCI card to my computer (the PCI card a encripter/decripter controler with a din-15 connection on it) and tried running the CNC with no luck.

when i open the NCStudio software there is an error message but its not in English.

I have never worked with a CNC before so this is all new to me!

Can someone give me a helping hand on guiding me please !!!

[cabnet636]

ther is a fellow named "my shadow boxes" here on the forums he has nc studio, you may want to contact "keling" and switch to mach, decen little router though!

are you in the US?

jim

[cabnet636]

i have deleted my copy of ncstudio but somewhere in the menu bar you can switch to english

jim

[6bx]

Jim
thanks for the info,but when the installation finished the router did not respond to any command from the pc.Is possible to make any mistake?Is it any procedure that i must follow?

Regards
George

[cabnet636]

i have a copy of ncstudio in english in zip form

it would not load here send me a pm and i will forward it to you, i no longer have a pci card for it

jim

[6bx]

Hey jim,

i was wondering on how you got rid of the PCI card ??

Did you replace the driver board on the cnc ?

my email is alex@japromotion.com if you could send me the ncstudio software!

Thanx for all your help by the way!

Regards,

George

[cabnet636]

you might not have to change the board, read up on mach 3 there is a forum here on the zone and on their site

http://www.machsupport.com/

http://www.cnczone.com/forums/mach_software_artsoft_software/

jim

[cabnet636]

i have emailed you the software and manual, let us know how it works out!

jim

[6bx]

thanx jim for your help but i still have some problems.

I installed the software you sent me and it found the pci card correctly this time.

I turned on the cnc and then opened the ncstudio software, once i did that the X-Y-Z Axis started to move by them selfs.

when they reached the limit switch's they still continued and started to make a grinding noise so i tund off the main power to the cnc.

when i looked at the software it had an error "limit switch on".


did anyone else have these problems ??


Please Help!

[cabnet636]

allright!! you have limit switches!!

what happened is the machine did nit acknowledge them and the motors tried to keep going

move slowly thru the manual i can tell this is new for you and unfortunatly you are in cyprus!! i have been there a long time ago it is very nice there but a long way away

jim

[cabnet636]

george here is a video of the same machine with the lathe you have!

jim

YouTube - Rotary of 6080

YouTube - Rotary of 6080

YouTube - CNC Router with rotary fixture

YouTube - CNC Router with rotary fixture

[cabnet636]

http://www.cnczone.com/forums/showthread.php?t=74396

here is a thread for someone who purchased the same machine!!

jim