We purchased a used confirmed working Wadkin Bosch CC100. After shipping to our workshop, one inverter (x axis) keeps giving an error code 2.
I was able to get one reference cycle to start. Z and Y axis moved, but when X axis tried to move error code 2 came back again.
Does anyone have a breakdown of the different error/fault codes with possible remedies. We have access to a micro electronics specialist so we can get down to the nitty gritty on the boards if required.
Thanks in advance for any ideas!!
The machine is a Wadkin UX CNC with a Bosch cc100 controller on it.
The error 2 shows up on the actual inverter, not on crt
Last edited by anyyoyo; 07-17-2008 at 11:31 PM. Reason: more info
What Brand is the inverter?
Did you resolve you X axis error.
If not I maybe able to help you
If this has a Bosch SM 10/20 TC module showing fault 2 it is generally a module fault. Try swapping X axis drive pack for y axis, see if the fault moves.