exitech cnc router

[SIGNMAD]

Well the deal has been done with Taney.
he has just emailed me back & said machine will be at port within
20 days
i would like to thank rocket & esmae for guiding me through
concerns i had with the purchase/freight so fourth.

stay tuned i will give follow up when i hear more

thanks again guys

regards
heath

[rocket67]

Hi Heath, Just remember to be well versed in your choice of software.

Have the bits ready to go, and the correct lubricants.

Did the faxes that i sent you come through ok? After the last page went through i received a print out that read " fax failed " ?

Rocket.

[cabnet636]

you can do it here!!

jim

[SIGNMAD]

Rocket,
fair call with software, after trailing the vetric 2d software
it seems simply & acurate.
i work with a program called signlab made by a company called Cadlink(US)
i'm gonig to see if i can get a trail of there software (engravelab)
i think i've got CNC FEVER, i woke @ 5.30am this morning.
running all sorts of idea's thru the the old brain box
I'll sleep easier when i hear it on the slow boat.

jim thanks for the welcome aboard, hopefully i can
work my way up to captain one day!!!

next couple of months will try to crunch as much info
into head as i can, before the machine arrives

ive got plenty of people **** canning me about the purchase
but i think i've made a good business deal

have a good day
heath

[SIGNMAD]

just a quick update taney has just emailed me, to say funds
have transfered to his account. all i can say is you have to
back up what you hear about the bloke he's super efficient.
also going to send software out early, it will give me a chance
to trail it before the unit comes.

stay tuned!!!!!!

regards
heath

[rocket67]

Glad to see that it is proceeding as planned.

By dealing with Taney it will be a smooth and well organised purchase.

Check this out - Forum member Matty Zee lives close by to us in Adelaide, and we have become friends through our mutual interest in CNC Routers. He is a very clever fella and has built his own cnc Router.

Matty decided to try to make an inlay on his router. Below is the result. It is fantastic!

Really opens your eyes to the possibilities of things you can make!

Rocket.