Need Help! cnt motion cnc - CNCzone.com-The Largest Machinist Community on the net!

DietzWoodPROD. · #1 03-12-2008, 05:09 PM

i just bought a used cnt motion cnc 900 series 2000 model and im new to the cnc world. but this cnc did not come with manual or wiring schematic and im wondering if anyone has one or where i could get information on hooking the cnc up and get it running.thanks

ger21 · #2 03-12-2008, 05:59 PM

My guess would be that contacting CNT motion would be your best bet.

Renato Petterin · #3 04-19-2008, 01:26 AM

Hello,
I have just bought the same machine; CNT 900. It came with WinCnc controller that hooks directly to the machine. WinCnc makes a new controller for this machine for about 3500.00 that includes the computer. I also have BobCacCam Version 22 which is their latest. They do not have the post processor for the 900, but are writeing one for me. The post is the G-code which is the program language that runs the machine. I called CNT and they have no info on the machine, but will send someone out for about 1000.00. Let me know what happens as I too am knew at all this.
Renato

cabnet636 · #4 04-19-2008, 08:06 PM

you should be able to find a .tap file pp in bobcad, this will be recognized by wincnc and run your machine. the shop sabre files are usable as they are .tap

jim

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ok Now what? No motion at all	SpookyDad	Xylotex	5	07-06-2006 04:21 PM
Need y-z motion help!	dtuom	Linear and Rotary Motion	3	12-03-2005 12:03 PM
BTC 1 not in motion	Kevin Taylor	Bridgeport and Hardinge Mills	7	10-23-2005 10:12 AM
motion?	hpghost	DIY-CNC Router Table Machines	3	04-04-2005 11:59 AM
No Motion	FLUTE HEAD	Xylotex	2	02-15-2005 09:33 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)