| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Commercial CNC Wood Routers Discussion Commercial CNC Wood Router Machines here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
01-16-2008, 10:32 PM
| |||
| |||
Hi. I have an old machine biesse rover 342 and I fade up of using the floppy. I want to install network card to connect the machine to my pc. Can I do it ? where can I get the card ? how to install it ? Thanks,    |
|
#2
01-16-2008, 10:38 PM
| ||||
| ||||
| It may take standard PCI or ISA cards. Open it up and see.
__________________ Gerry Mach3 2010 Screenset http://home.comcast.net/~cncwoodworker/2010.html (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |
|
#3
02-07-2008, 05:12 AM
| |||
| |||
it's an old one doesn't have and ISA neither PCI. there is serial port. maybe can use it to connecet to a pc ? Also, have problem with the floppy drive (1.44), is it standart one or need to buy only from biesse ? |
|
#4
02-17-2008, 04:40 AM
| |||
| |||
i just purchased a biesse 321. it had trouble booting. i fitted a floppy out of an old pc i had here. just had to cut pad cn1 and solder pad cn0 to get it to work. now boots fine. i need a programming guide for biesse 481 controller if anyone can help and a user manual. it would be nice if i could get it to move! |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Milltronics MB-19 network card | jetski | Milltronics | 14 | 10-19-2007 11:05 AM |
| Biesse Rover 22 | paul sharpe | Teachers Hang out | 2 | 10-09-2007 01:50 PM |
| Hurco network card | Piobaire | HURCO | 1 | 08-22-2007 11:24 PM |
| Bieese rover 342 | eng_semsem1980 | Xylotex | 0 | 07-10-2007 05:22 AM |
| Mach 3 Wireless Network Card Interference | bill south | Mach Mill | 5 | 07-13-2006 03:25 PM |
| | |
Linear Mode
