| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Commercial CNC Wood Routers Discussion Commercial CNC Wood Router Machines here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
01-16-2008, 10:19 PM
| |||
| |||
I was wondering if anybody could point me in the right direction- I'm currently routing doors for inbuilt wardrobes, but have hit a problem. The wardrobes that I'm cutting the patterns for are 900x2700 mm MDF boards, and each have their own specific vectors for the pattern. All I need to know is what program I could use, so that when I change the size of the MDF board the vectors will change in proportion to the size of the board?? So If i make it smaller or larger the vectors/toolpath will automatically change with the size of the board?? If anybody could help that would be great! Thankyou!    |
|
#2
01-16-2008, 10:32 PM
| |||
| |||
|
|
#3
01-16-2008, 10:42 PM
| ||||
| ||||
|
__________________ Gerry Mach3 2010 Screenset http://home.comcast.net/~cncwoodworker/2010.html (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Question on using "plasma" table for routing | Red Earth | CNC Plasma and Waterjet Machines | 1 | 04-09-2007 01:04 AM |
| software question | KEYTEEM | General CAM Discussion | 6 | 06-19-2006 09:31 PM |
| software question? | research | JGRO Router Table Design | 3 | 10-18-2005 12:38 AM |
| CNC Software question | studysession | General Metal Working Machines | 3 | 01-05-2005 03:19 AM |
| $500 Cam software question | bgriggs | General CAM Discussion | 6 | 07-10-2004 02:21 PM |
| | |
Linear Mode
