Code Transfer - Bosch CC100

[martindugdale]

Can anybody please educate me regarding the sending of codes FROM my CC100 to my PC, only I can't seem to find any function on the controller that allows this.

Any help would be most appreciated.

Regards,

Martin

[royp]

goto memory programs save there are options to save selected program only,all programs,programs and cycles

[martindugdale]

Nice one, Cheers buddy

[enegma7000]

I have cnc machine for glass work with bosch controller cc120 After operating requesting reinstatement programming Are there who can help in the programming process for this controller and bost it to me

[bart070481]

I have a Bosch CC100M
and I use PowerMill by Delcam but I haven't the post processor
Now I use Post processor fanucom.opt but this post not is good from my Bosch
becouse , I atc. the File produced by my CAM and the file that I have dowloaded by the CNC Bosch
Have you an Post processor good?
or
Can you be able to modify my post to separate the N , ad G
Best Regards Francesco

[alteat]

Hello people! I have an old bulleri fpm series machine controlled by a Bosch CC100M controller! I don't seem to be able to find any information regarding the manuals of any of the parts... I was wondering if there would be someone in possession of at least the controller manual! I would appreciate it very much, if someone could help me!

Pls, if you have any info regarding this problem, post it here...

Thx

[bart070481]

I know what to try...........
I would help, but my manual is made on PAPER, and is very impossible to scan all manual.
Try to send an a mail at http://www.boschrexroth.com

[core units]

enibody have a postprocesor for bosch 100 cc!soryy on bad english

[core units]

Post processor for mastercam x2 bosch cc120,or for solidcam bosch cc120

orasnica.lesnica@gmail.com