Weeke Machine anyone?

[DennisCNC]

I bought a nice working BP-12 and this is my fist CNC and not sure how to work it
I know how to reference the machine and move it around in MDI mode. But need some help in running a saved file. The machine has 2,200 saves programs on it. so plenty to test.

Is there some thing that needs to be set after turning on the machine with tooling?

When I go in to WoodWop I can load a file and it is visible on the screen. What do I do next?
This is what I tried, push the vacuum pedal the vacuum tuns on the back pins go down, step back and push the green start button and nothing happens. And some times the back pins go down and a second latter the vacuum goes off and pin go up.

But it's fun to see the machine go 60 meters/min and stop to with it .02mm

Thanks

[johncnc315]

Ho old of a weeke is your machine?... can you upload any pics of the controller?

John

[DennisCNC]

It is a '94 machine and here is a link to controller pic:
http://www.xfactory.com/seephoto.asp...um=BP%2D010997

[DennisCNC]

The person that I bought the machine from stopped by and explained how to get this thing working. So I cut my first circle in mfd with it! This machine has way tooo many options.

[jpjpk80]

anyone have a post processor for alphacam weeke??

[ben38331]

I have a woodwop post
Ben

[jpjpk80]

Originally Posted by ben38331 I have a woodwop post Ben

send me please weeke post processor for alphacam, to joaofernandesx@gmail.com.

Cump, joão fernandes