| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Commercial CNC Wood Routers Discussion Commercial CNC Wood Router Machines here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
12-01-2006, 01:01 PM
| |||
| |||
Never used one of these machines but i am considering one for drilling 200 small holes in some 5mm thick plastic. (  I have several hundred sheets to Do)Looking at what is available they either seem to be very expensive or very small!! Any suggestions to lead me down this windy path would be a help!!!
__________________ SteveSteve  |
|
#2
12-01-2006, 05:20 PM
| ||||
| ||||
| The cheapest thing to do would be to pay someone to do it for you. You're correct, a 4x4 router is rather expensive. And, it'll come with a fairly steep learning curve. If you on;y need it for this one job, pay someone else to do the job for you.
__________________ Gerry Mach3 2010 Screenset http://home.comcast.net/~cncwoodworker/2010.html (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
