| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Commercial CNC Wood Routers Discussion Commercial CNC Wood Router Machines here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#2
10-10-2006, 07:52 AM
| ||||
| ||||
| You'll probably need to create a custom post processor.
__________________ Gerry Mach3 2010 Screenset http://home.comcast.net/~cncwoodworker/2010.html (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)  |
|
#3
10-12-2006, 05:20 PM
| |||
| |||
Post your question in the Vectric forums, Post Processor section, and Tony or Brian will give you an answer. Jason |
|
#4
10-13-2006, 03:43 PM
| |||
| |||
| Hi Craig, We do now have a VCarve Pro postp to drive the SCM Routers. I'm guessing you might be the same person who asked about an SCM postp on the Vectric Forum? If it is, did you receive my e-mail + notes on how to use the postp? If I've got the wrong person please e-mail support@vectric.com and we will send you the information. Tony |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
