Results 1 to 2 of 2

Thread: Rover 20 NC410

  1. #1
    Registered
    Join Date
    Apr 2012
    Location
    Canada
    Posts
    2
    Downloads
    0
    Uploads
    0

    Rover 20 NC410

    HI !
    We are trying to reinstall the sftware on Rover 20 NC410 with software 4.24 but when reading files we get reading errors on all files read by the floppy.
    Is the sotware corrupted and is it possible to get the software to download somewhere ?

    Thank you.


  2. #2
    Registered
    Join Date
    Apr 2012
    Location
    Canada
    Posts
    2
    Downloads
    0
    Uploads
    0
    We did reformat but after, error PLC 9121 shows without knowing what to do .


Similar Threads

  1. Need Help!- BobcadV21 & NC410
    By titi in forum BobCad-Cam
    Replies: 1
    Last Post: 01-25-2011, 01:04 PM
  2. Biesse Rover 20 NC410
    By Jamf2 in forum Commercial CNC Wood Routers
    Replies: 22
    Last Post: 10-12-2010, 06:55 PM
  3. Biesse Rover 20 NC410
    By junglist in forum CNC Machining Centers
    Replies: 6
    Last Post: 09-24-2010, 02:58 PM
  4. What post processor to pick in VCarve for a Rover 20 NC410?
    By gothdesigner in forum CNC Machining Centers
    Replies: 2
    Last Post: 03-05-2008, 06:20 PM

Posting Permissions


 


About CNCzone.com

    We are the largest and most active discussion forum from DIY CNC Machines to the Cad/Cam software to run them. The site is 100% free to join and use, so join today!

Follow us on

Facebook Dribbble RSS Feed


Search Engine Friendly URLs by vBSEO ©2011, Crawlability, Inc.