our company just purchased a Komo vr512 with fanuc controls, when it arrived some of the batteries had died and the machine has lost it's machine zero somehow, does anyone know how to reset the machine zero on one of these I don't know much about this machine because I am mostly a CNC Vmc operator I know on most VMCs there are marks to line up the axis to but cannot seem to find anything on this. any help would be greatly appreicated.
go to your offset setting and change your pw to1 make sure your your in mdi do mind the alarm push your system key find par. 1815 change your apz 0 when it says power down press system key agian and you can change the other axis apz to 0 power down .power back up line all axis up with scrib marks then change apz back to 1 power down and your done
Posting Permissions
LinkBack URL
About LinkBacks
