Masterwood information

[comandojon]

I am going to look at a 2006 masterwood project 315 flat table machine. I have a call into the parts and service company for info, but am hoping there might be a few users on here that own one.

Just curious as to what the control system is, what post processor set ups are being used, maintenance issues and all that.

Thanks

Jon

[comandojon]

It had 29 hours on it and the price the asset recovery company was selling it for was less than 1/5 of new. Talked to masterwood parts and service, they were very helpful in what to look for and what they offer for support. 29 hours it's cleaner than my cam wood with 1000 hours on it