I need help on NUM750

[ahmedsamy_81]

hello
i need help on how to deal with num750,where i have french handbook but i need english manual.
and i need help in where i can find english manuals for operating and programming SCM router.

[flinty]

I have an SCM Record 2 and it has a NUM 750 control, I am told that there are some differences in the types of controls, what are you after and I can probably assist
chris f

[omar sanad]

you have scm - num 750 -- if you working in wood I have the same - Iam in EGypt - Cairo - Elopoor

[ahmedsamy_81]

Thanks mr.Omar Sanad
yes i am egyptian and work in company near (6th october)
please send me your phone or send me mail on
ahmedsamy_81@yahoo.com
to take about how we can share informations

[ahmedsamy_81]

Originally Posted by flinty I have an SCM Record 2 and it has a NUM 750 control, I am told that there are some differences in the types of controls, what are you after and I can probably assist chris f

i need help for how i can obtain the english version for Num 750 handbook?
and for my first program i face a problem in the tool change , where the magazin is rotatig contiuously without stop when the program start in toochane cycle, how i can solve this problem?

[flinty]

The tool change should be standard ISO programming that is for example
T1 M6 for tool 1 M6 to change the tool.
To try this out in MDI (manual mode) you select MDI mode
and key in
T1 M6 and LF ( enter) and CYC start.
BUT you must press the cycle start key 4 times to action the command.
You can also try entering M12 which should rotate the tool changer to position 1 after a full rotaion, or M15 which will move it 1 position.
If you email me directly ( click on my name flinty above and send private email)( tell me what CNC machine you have) and you have a broadband connection ( for big file size).
I will email you copies of programs which have tool change in them as well as a lot of NUM information and I am sure we can get you going easily, I am also happy to give you a copy of my post processor which is written for NUM750F and Mastercam Version 9

[ahmedsamy_81]

thanks ror your quick reply
but can u send for me any help for num750 programming and operation in english

[flinty]

yes but I need you direct email address because I do not know how to attach files on the zone
chris

[ahmedsamy_81]

my email address ahmedsamy_81@yahoo.com

[ahmedsamy_81]

another note when i press MDI how i can write
T1 M6 or M12 while the screen don't allow me to do that?

[ahmedsamy_81]

When will you send me the files?

[flinty]

I have a full set of Programming and operating manuals Xeroxed for you as requested.
Please let me know when you are going to pay for them and I will ship as soon as I get your address from you.
chris f