LinkBack URL
About LinkBacks
Hi, mine is 1999 vintage.
The help files are windows programs. I have both the technical and operator manuals.
Do you have the PC used to feed programs to the machine?
-Jim Hart
| | |
Hi All
Would anyone have a .pdf manual for a 14 year old Multicam MG series router?
Last edited by Dropout; 10-16-2010 at 04:53 PM.
Hi, mine is 1999 vintage.
The help files are windows programs. I have both the technical and operator manuals.
Do you have the PC used to feed programs to the machine?
-Jim Hart
My main machine: Multicam MG series (MG101) with original Extratech H971 controller, Minarik servo motors, Electro-Craft BRU-series drives, 4KW Colombo. Let's talk Multicam!
Hi Jim
Yes I have access to that machine. What are the files that I should be looking for? I glanced through the folders the other day but I was looking for a pdf file.
What I have is called "Multicam Users Manual", and "Technical Manual" and they are in the form of compiled HTML help files.
Hopefully they're on the host PC, if not I'd be willing to zip them and email.
Is there anything on the PC called MX32?
-Jim Hart
My main machine: Multicam MG series (MG101) with original Extratech H971 controller, Minarik servo motors, Electro-Craft BRU-series drives, 4KW Colombo. Let's talk Multicam!
Hi Jim
I remember a MX32 folder. I'll check this out the next time I'm at the machine.
Thanks.
Posting Permissions
| | |
