| | |
4 axis samples of gunstock Here are the gunstock made by our 4 axis machine.We made it with the mastercam, then the soft generate the tool path and engrave it.If anybody have interest in it.you can leave an message or contact me.
Hi, this is a forum for discussion by users of machines built by a company, rather than a place to promote your own company.
My main machine: Multicam MG series (MG101) with original Extratech H971 controller, Minarik servo motors, Electro-Craft BRU-series drives, 4KW Colombo. Let's talk Multicam!
Posting Permissions
| | |
LinkBack URL
About LinkBacks
