3dprintforums logo



Page 1 of 2 12 LastLast
Results 1 to 12 of 19

Thread: Ncstudio Upgraded Version V5.5.60 (ENGLISH)

  1. #1
    Registered
    Join Date
    Nov 2009
    Location
    China
    Posts
    283
    Downloads
    0
    Uploads
    0

    Ncstudio Upgraded Version V5.5.60 (ENGLISH)

    Hi all,

    I received the same requests for this Ncstudio Upgraded V5.5.60 (ENGLISH) SET UP Version,
    So if your machine has the same problem with below friend's, please go for download this Software in attachement.

    Softare Name:Ncstudio Upgraded Version V5.5.60 (ENGLISH)

    Wish this will help you!

    Regards
    mike@xyz-tech.com
    support@xyz-tech.com
    www.xyz-tech.com
    http://cid-2c112863b5a081a5.skydrive...SH%20Setup.rar
    --------------------------------------------------------------------------

    hello

    i have here now a cnc router from china
    but it is not working.
    i have install the software from nc studio i think at the good way.
    I installed the software and it found the pci card correctly.

    I turned on the cnc and then opened the ncstudio software, once i did that the X-Y-Z Axis started to move by them selfs.

    when they reached the limit switch's they still continued and started to make a grinding noise so i tund off the main power to the cnc.

    when i looked at the software it had an error "limit switch on".

    so i think i have bad version of ncstudio

    please help me with this

    thanks

    andre

    Similar Threads:


  2. #2
    Registered
    Join Date
    Jul 2008
    Location
    bahrain
    Posts
    4
    Downloads
    0
    Uploads
    0
    Quote Originally Posted by EXLASer View Post
    Hi all,

    I received the same requests for this Ncstudio Upgraded V5.5.60 (ENGLISH) SET UP Version,
    So if your machine has the same problem with below friend's, please go for download this Software in attachement.

    Softare Name:Ncstudio Upgraded Version V5.5.60 (ENGLISH)

    Wish this will help you!

    Regards
    mike@xyz-tech.com
    support@xyz-tech.com
    CNC Router Laser Cutting Machine CNC Engraving Machine-XYZ Technologies Limited
    Welcome to Windows Live
    --------------------------------------------------------------------------

    hello

    i have here now a cnc router from china
    but it is not working.
    i have install the software from nc studio i think at the good way.
    I installed the software and it found the pci card correctly.

    I turned on the cnc and then opened the ncstudio software, once i did that the X-Y-Z Axis started to move by them selfs.

    when they reached the limit switch's they still continued and started to make a grinding noise so i tund off the main power to the cnc.

    when i looked at the software it had an error "limit switch on".

    so i think i have bad version of ncstudio

    please help me with this

    thanks

    andre


    hi,
    Could you please email me a copy of Ncstudio Upgraded V5.5.60 (ENGLISH) SET UP Version

    jalal aw
    artncraft@hotmail.com

    thanks



  3. #3
    Registered
    Join Date
    Nov 2009
    Location
    China
    Posts
    283
    Downloads
    0
    Uploads
    0

    Software HAD sent you,pls check!

    jalal aw,
    I had sent Ncstudio5.4 to your eamil
    artncraft@hotmail.com,pls kindly check and installed.
    Wish this help you,
    Mike
    mike@xyz-tech.com
    CNC Router Laser Cutting Machine CNC Engraving Machine-XYZ Technologies Limited



  4. #4
    Registered zac123's Avatar
    Join Date
    Aug 2011
    Location
    uk
    Posts
    20
    Downloads
    0
    Uploads
    0
    can anyone tell me where to download the latest version of ncstudio please?

    zac



  5. #5
    Registered
    Join Date
    May 2012
    Location
    Kenya
    Posts
    6
    Downloads
    0
    Uploads
    0
    hi, i have the same problem so i tried to instal nc studio 5.560 but it crashed due to a bug. if any one knows a fix i would be very gratefull.
    kornelius



  6. #6
    Registered
    Join Date
    Nov 2010
    Location
    China
    Posts
    222
    Downloads
    0
    Uploads
    0
    Blog Entries
    1
    Hi Andre,

    Does your cnc wood router is with limit switch?

    Sunny Sun http://www.omni-cnc.com
    Email: sales@omni-cnc.com


  7. #7
    Registered
    Join Date
    Aug 2012
    Location
    Yemen
    Posts
    1
    Downloads
    0
    Uploads
    0

    Z X Y

    I had the same problem, i install the program and open it i try to engrave some works the spindle work but the Z X Y don't work the head don't move to x , y or z

    so pleae help me i am waiting for your reply



  8. #8
    Registered
    Join Date
    Jul 2008
    Location
    wales
    Posts
    1
    Downloads
    1
    Uploads
    0

    NC Studio

    My pc just died in the middle of a new job, I just tried to reload NC studio to find the disk is corrupted, does anyone know if there is a download for this software anywhere
    Thanks



  9. #9
    Registered
    Join Date
    Jul 2007
    Location
    usa
    Posts
    1
    Downloads
    0
    Uploads
    0
    hi you can send me the ncstudio please, mil_tones28@yahoo.es, thanks



  10. #10
    Registered
    Join Date
    May 2013
    Location
    UK
    Posts
    4
    Downloads
    0
    Uploads
    0
    does anyone still have a link for the latest version of NC studio. I can't find one anywhere



  11. #11
    Registered
    Join Date
    Mar 2013
    Location
    Australia
    Posts
    72
    Downloads
    0
    Uploads
    0
    Hi hazelelectronic.

    I have version 5.5.6. It recently came with my cnc. I've found its as 'buggy' as v5.5.4. All error messages come up in hieroglyphics etc...

    Anyone have a newer or better version?


    Www.mostynindustries.com.au
    Cafe Racer and Custom Bike Builds



  12. #12

    Re: Ncstudio Upgraded Version V5.5.60 (ENGLISH)

    hi, i have the same problem, machine don't feel swicth limit and when open nc studio, it go on right without stop. do you think that make upgrade v5.60 slove my problem. may i have it? thanks.



Page 1 of 2 12 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum from DIY CNC Machines to the Cad/Cam software to run them. The site is 100% free to join and use, so join today!

Follow us on

Facebook Dribbble RSS Feed