Build Thread Ncstudio Upgraded Version V5.5.60 (ENGLISH)


Page 1 of 2 12 LastLast
Results 1 to 20 of 34

Thread: Ncstudio Upgraded Version V5.5.60 (ENGLISH)

  1. #1
    Registered EXLASer's Avatar
    Join Date
    Nov 2009
    Location
    China
    Posts
    314
    Downloads
    0
    Uploads
    0

    Default Ncstudio Upgraded Version V5.5.60 (ENGLISH)

    Hi all,

    I received the same requests for this Ncstudio Upgraded V5.5.60 (ENGLISH) SET UP Version,
    So if your machine has the same problem with below friend's, please go for download this Software in attachement.

    Softare Name:Ncstudio Upgraded Version V5.5.60 (ENGLISH)

    Wish this will help you!

    Regards
    mike@xyz-tech.com
    support@xyz-tech.com
    www.xyz-tech.com
    http://cid-2c112863b5a081a5.skydrive...SH%20Setup.rar
    --------------------------------------------------------------------------

    hello

    i have here now a cnc router from china
    but it is not working.
    i have install the software from nc studio i think at the good way.
    I installed the software and it found the pci card correctly.

    I turned on the cnc and then opened the ncstudio software, once i did that the X-Y-Z Axis started to move by them selfs.

    when they reached the limit switch's they still continued and started to make a grinding noise so i tund off the main power to the cnc.

    when i looked at the software it had an error "limit switch on".

    so i think i have bad version of ncstudio

    please help me with this

    thanks

    andre

    Similar Threads:


  2. #2
    Registered
    Join Date
    Jul 2008
    Location
    bahrain
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by EXLASer View Post
    Hi all,

    I received the same requests for this Ncstudio Upgraded V5.5.60 (ENGLISH) SET UP Version,
    So if your machine has the same problem with below friend's, please go for download this Software in attachement.

    Softare Name:Ncstudio Upgraded Version V5.5.60 (ENGLISH)

    Wish this will help you!

    Regards
    mike@xyz-tech.com
    support@xyz-tech.com
    CNC Router Laser Cutting Machine CNC Engraving Machine-XYZ Technologies Limited
    Welcome to Windows Live
    --------------------------------------------------------------------------

    hello

    i have here now a cnc router from china
    but it is not working.
    i have install the software from nc studio i think at the good way.
    I installed the software and it found the pci card correctly.

    I turned on the cnc and then opened the ncstudio software, once i did that the X-Y-Z Axis started to move by them selfs.

    when they reached the limit switch's they still continued and started to make a grinding noise so i tund off the main power to the cnc.

    when i looked at the software it had an error "limit switch on".

    so i think i have bad version of ncstudio

    please help me with this

    thanks

    andre


    hi,
    Could you please email me a copy of Ncstudio Upgraded V5.5.60 (ENGLISH) SET UP Version

    jalal aw
    artncraft@hotmail.com

    thanks



  3. #3
    Registered EXLASer's Avatar
    Join Date
    Nov 2009
    Location
    China
    Posts
    314
    Downloads
    0
    Uploads
    0

    Default Software HAD sent you,pls check!

    jalal aw,
    I had sent Ncstudio5.4 to your eamil
    artncraft@hotmail.com,pls kindly check and installed.
    Wish this help you,
    Mike
    mike@xyz-tech.com
    CNC Router Laser Cutting Machine CNC Engraving Machine-XYZ Technologies Limited



  4. #4
    Registered zac123's Avatar
    Join Date
    Aug 2011
    Location
    uk
    Posts
    22
    Downloads
    0
    Uploads
    0

    Default

    can anyone tell me where to download the latest version of ncstudio please?

    zac



  5. #5
    Registered
    Join Date
    May 2012
    Location
    Kenya
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default

    hi, i have the same problem so i tried to instal nc studio 5.560 but it crashed due to a bug. if any one knows a fix i would be very gratefull.
    kornelius



  6. #6
    Member
    Join Date
    Nov 2010
    Location
    China
    Posts
    307
    Downloads
    0
    Uploads
    0

    Default

    Hi Andre,

    Does your cnc wood router is with limit switch?

    Amanda Cheung from OMNI, www.omni-cnc.com,
    sales@omni-cnc.com, Skype: omni-cnc


  7. #7
    Registered
    Join Date
    Aug 2012
    Location
    Yemen
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Z X Y

    I had the same problem, i install the program and open it i try to engrave some works the spindle work but the Z X Y don't work the head don't move to x , y or z

    so pleae help me i am waiting for your reply



  8. #8
    Registered
    Join Date
    Jul 2008
    Location
    United Kingdom
    Posts
    11
    Downloads
    4
    Uploads
    0

    Default NC Studio

    My pc just died in the middle of a new job, I just tried to reload NC studio to find the disk is corrupted, does anyone know if there is a download for this software anywhere
    Thanks



  9. #9
    Registered
    Join Date
    Jul 2007
    Location
    usa
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default

    hi you can send me the ncstudio please, mil_tones28@yahoo.es, thanks



  10. #10
    Registered
    Join Date
    May 2013
    Location
    UK
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default

    does anyone still have a link for the latest version of NC studio. I can't find one anywhere



  11. #11
    Registered
    Join Date
    Mar 2013
    Location
    Australia
    Posts
    82
    Downloads
    0
    Uploads
    0

    Default

    Hi hazelelectronic.

    I have version 5.5.6. It recently came with my cnc. I've found its as 'buggy' as v5.5.4. All error messages come up in hieroglyphics etc...

    Anyone have a newer or better version?


    Www.mostynindustries.com.au
    Cafe Racer and Custom Bike Builds



  12. #12

    Default Re: Ncstudio Upgraded Version V5.5.60 (ENGLISH)

    hi, i have the same problem, machine don't feel swicth limit and when open nc studio, it go on right without stop. do you think that make upgrade v5.60 slove my problem. may i have it? thanks.



  13. #13
    Registered
    Join Date
    Mar 2013
    Location
    Australia
    Posts
    82
    Downloads
    0
    Uploads
    0

    Default Re: Ncstudio Upgraded Version V5.5.60 (ENGLISH)

    To be honest I gave up on 5.5.6. The English version of 5.5.4 isn't perfect either but one thing it does at least drill correctly in sequence.


    Sent from my iPad using Tapatalk



  14. #14

    Default Re: Ncstudio Upgraded Version V5.5.60 (ENGLISH)

    hi raf, thanks for your answer, today, i'll try to install v.5.5.6, but i don't know is it a right version, where do you download this version??



  15. #15
    Registered
    Join Date
    Apr 2014
    Location
    China
    Posts
    28
    Downloads
    0
    Uploads
    0

    Default Re: Ncstudio Upgraded Version V5.5.60 (ENGLISH)

    Dear all,

    This is Engineer Charles from Weihong, manufacturer of Ncstudio.

    As an official advice, Ncstudio V5 is 10 years old version and not stable.
    Please take a look at Ncstudio V8,V9,V10,V12, they are much more better.
    https://www.dropbox.com/s/mzrou1mmqh...6A_std_ex7.exe
    https://www.dropbox.com/sh/qt39zlgbhqlet7g/OIFbMZVkrH

    Any question about Ncstudio, warmly welcome to contact me
    Gmail: charles.weihong@gmail.com
    Skype: charles.weihong


    Best Regards



  16. #16

    Default Re: Ncstudio Upgraded Version V5.5.60 (ENGLISH)

    dear charles, may you post some link to dowload some new version of nc studio more stable to begin to use this software??thank you very much



  17. #17
    Registered
    Join Date
    Apr 2014
    Location
    China
    Posts
    28
    Downloads
    0
    Uploads
    0

    Default Re: Ncstudio Upgraded Version V5.5.60 (ENGLISH)

    Dear arny,

    Enclosed is demo ncstudio V8, running on WinXP or Win7 32bit, please take a look.
    https://www.dropbox.com/s/mzrou1mmqh...6A_std_ex7.exe


    Best Regards



  18. #18

    Default Re: Ncstudio Upgraded Version V5.5.60 (ENGLISH)

    hi, thanks, but link don't go



  19. #19
    Registered
    Join Date
    Apr 2014
    Location
    China
    Posts
    28
    Downloads
    0
    Uploads
    0

    Default Re: Ncstudio Upgraded Version V5.5.60 (ENGLISH)



  20. #20
    Member
    Join Date
    Aug 2007
    Location
    denmark
    Posts
    75
    Downloads
    0
    Uploads
    0

    Default Re: Ncstudio Upgraded Version V5.5.60 (ENGLISH)

    Hi Charles ,

    Do you have a demo for plasma/laser cutter also .? like the one on the picture.

    Ncstudio Upgraded Version V5.5.60 (ENGLISH)-plasma-jpg



Page 1 of 2 12 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Ncstudio Upgraded Version V5.5.60 (ENGLISH)

Ncstudio Upgraded Version V5.5.60 (ENGLISH)