Ncstudio Upgraded Version V5.5.60 (ENGLISH)

[crandolph]

Does anyone have the installer for ncstudio? His download link doesn't work anymore?

[radiant]

hi,

dear all

i need Ncstudio Upgraded Version V5.5.60 (ENGLISH)

please help me. if you have sent mail.

radiantrubbers@gmail.com

[Dchris01]

Would anyone have an English version of NC studio that I could use

[talk2jameslastb]

Hi Mike
Kindly send me Ncstudio5.4 to my email talk2jameslastb@yahoo.com. I need it urgently for installation.

Thank you

jalal aw,
I had sent Ncstudio5.4 to your eamil
artncraft@hotmail.com,pls kindly check and installed.
Wish this help you,
Mike
mike@xyz-tech.com
CNC Router Laser Cutting Machine CNC Engraving Machine-XYZ Technologies Limited

[talk2jameslastb]

hi,

dear all

i need Ncstudio Upgraded Version V5.5.60 (ENGLISH)

Kindly send it to my email. Thank you

zikjaymz@gmail.com

[Bobrl]

Would anyone have an English version of NC studio that I could use

Hello. My name is Bob in USA. Need to speak with anyone who can help with my China cnc router. Suppouse to run on Windows XP. With NcStudio. But i cant get it working !!! Any help would be great !!!! I have a Jcut machine.

[DRUMCO]

Were you able to find the English version of this software? I too just acquired a JCUT Machine but all in Chinese and do have a fighting chance. Thanks in advance.
Art

[rdcampana]

Hi Friend

Can you send a copy to rdcampana@hotmail.com or rdcampana@gmail.com


Please!

[gregory_gordon]

Hi.
I am trying to get am ENGLISH version of NC Studio V5.5.60. I see in this tread many people have requested it, and it looks like many people have offered it. But all of the links have expired (it been about eight years).

We have just received a new machine from ACUT in china. They supplied NC Studio V5.5.60, but the error messages come up in strange characters. The helpful people at ACUT tell me this is not a problem, but seeing as I cannot get the machine to work yet, I really would like to know what the error messages say.

Apparently newer versions of NC Studio require a different PCI card. so this is why I am keen to get V5.5.60 and not the latest version. We are doing only simple 2D cutting, so I hope we can avoid any bugs.

I am grateful for any assistance and advice.

Kind regards

Gregory

[Tariq Assar]

Thank you all.
Any updated links to download NC Studio? Links above are dead.

[Tariq Assar]

Hi Charles,
Thank you for your time.
Any updated links to NCStudio? Old links are dead.

Dear all,

This is Engineer Charles from Weihong, manufacturer of Ncstudio.

As an official advice, Ncstudio V5 is 10 years old version and not stable.
Please take a look at Ncstudio V8,V9,V10,V12, they are much more better.
https://www.dropbox.com/s/mzrou1mmqh...6A_std_ex7.exe
https://www.dropbox.com/sh/qt39zlgbhqlet7g/OIFbMZVkrH

Any question about Ncstudio, warmly welcome to contact me
Gmail: charles.weihong@gmail.com
Skype: charles.weihong


Best Regards

[ROTULOS]

Hello.
I have same problem as Andre.
When start Ncstudio, all axis start to move and only can stop closind ncstudio or switching off the CNC.
Did you solve this problem?
Someone can help me?
Thanks in advance.

Hi all,

I received the same requests for this Ncstudio Upgraded V5.5.60 (ENGLISH) SET UP Version,
So if your machine has the same problem with below friend's, please go for download this Software in attachement.

Softare Name:Ncstudio Upgraded Version V5.5.60 (ENGLISH)

Wish this will help you!

Regards
mike@xyz-tech.com
support@xyz-tech.com
XYZ Machinery GmbH - CNC Maschine Hersteller - CNC Fräsmaschinen und Maschinen Provider Gravur - fertige CNC Maschine
http://cid-2c112863b5a081a5.skydrive...SH%20Setup.rar
--------------------------------------------------------------------------

hello

i have here now a cnc router from china
but it is not working.
i have install the software from nc studio i think at the good way.
I installed the software and it found the pci card correctly.

I turned on the cnc and then opened the ncstudio software, once i did that the X-Y-Z Axis started to move by them selfs.

when they reached the limit switch's they still continued and started to make a grinding noise so i tund off the main power to the cnc.

when i looked at the software it had an error "limit switch on".

so i think i have bad version of ncstudio

please help me with this

thanks

andre

[rajsek]

I tried to download from the link, but error occured.

Please send the Ncstudio Upgraded Version V5.5.60 (ENGLISH) to my email id: rajsekharroy@gmail.com

[cnctiendong]

Please send the Ncstudio Upgraded Version V5.5.60 (ENGLISH) to my email: tien0932710435@gmail.com. Thank you!