aspire, vcarve pro


Results 1 to 19 of 19

Thread: aspire, vcarve pro

  1. #1
    Member cabnet636's Avatar
    Join Date
    Oct 2007
    Location
    usa
    Posts
    2466
    Downloads
    0
    Uploads
    0
    James McGrew CAMaster 508 ATC
    www.mcgrewwoodwork.com http://dropc.am/p/EJaKyl


  2. #2
    Registered
    Join Date
    Jun 2007
    Location
    US
    Posts
    71
    Downloads
    0
    Uploads
    0

    Default

    The Vectric is great software. Inspire is insane!! especially for the price. I tell everybody to get it.



  3. #3
    Member cabnet636's Avatar
    Join Date
    Oct 2007
    Location
    usa
    Posts
    2466
    Downloads
    0
    Uploads
    0

    Default

    got this today and while i have aspire i thought it speaks volumes of the men who are vectric!
    jim

    "Dear Customer, After receiving a number of emails from customers and reading the messages posted on the Vectric forum, we have decided to extend the discount period for existing customers* who would like to upgrade to Aspire until the 31st January 2009. Visit the Vectric web site at www.vectric.com for full details about Aspire and to download the Trial version + Video Tutorials. Please remember that the upgrade pricing options will increase by $550 from the 1st February 2009 when the introductory discounts end. VCarve Pro upgrade to Aspire, currently $900 will increase $1,450Cut3D upgrade to Aspire, currently $1,200 will increase to $1,750 A full new licence of Aspire will increase from $1750 to $2000 We hope extending the cut off date will help those customers who found the existing date to be too close to Christmas for comfort. Please let us know if you have any questions. Thank you, The Vectric Team * Upgrade pricing is only available to customers who purchased VCarve Pro or Cut3D before 22nd October 2008"

    James McGrew CAMaster 508 ATC
    www.mcgrewwoodwork.com http://dropc.am/p/EJaKyl


  4. #4
    Member cabnet636's Avatar
    Join Date
    Oct 2007
    Location
    usa
    Posts
    2466
    Downloads
    0
    Uploads
    0

    Default

    cannot say enough about aspire

    Attached Thumbnails Attached Thumbnails aspire,  vcarve pro-img_2879-jpg   aspire,  vcarve pro-img_2876-jpg   aspire,  vcarve pro-img_2878-jpg  
    James McGrew CAMaster 508 ATC
    www.mcgrewwoodwork.com http://dropc.am/p/EJaKyl


  5. #5
    Member Khalid's Avatar
    Join Date
    Apr 2006
    Location
    Pakistan
    Posts
    3498
    Downloads
    0
    Uploads
    0

    Default

    Jim..In the first picture u did a great design in the middle.. did u maek it in Aspire or custom made... its not on th Vectorart3D site..

    By the way great work u did and very very nice finishing

    Thanks and Best Regards

    http://free3dscans.blogspot.com/ http://my-woodcarving.blogspot.com/
    http://my-diysolarwind.blogspot.com/


  6. #6
    Member cabnet636's Avatar
    Join Date
    Oct 2007
    Location
    usa
    Posts
    2466
    Downloads
    0
    Uploads
    0

    Default

    i got the other file from vectorclip3d

    and thanks!!!

    jim

    James McGrew CAMaster 508 ATC
    www.mcgrewwoodwork.com http://dropc.am/p/EJaKyl


  7. #7
    Member ger21's Avatar
    Join Date
    Mar 2003
    Location
    Shelby Township
    Posts
    35538
    Downloads
    1
    Uploads
    0

    Default

    Don't try to tell me you made the curved doors with Aspire?

    Gerry

    UCCNC 2017 Screenset
    [URL]http://www.thecncwoodworker.com/2017.html[/URL]

    Mach3 2010 Screenset
    [URL]http://www.thecncwoodworker.com/2010.html[/URL]

    JointCAM - CNC Dovetails & Box Joints
    [URL]http://www.g-forcecnc.com/jointcam.html[/URL]

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  8. #8
    Member cabnet636's Avatar
    Join Date
    Oct 2007
    Location
    usa
    Posts
    2466
    Downloads
    0
    Uploads
    0

    Default

    doors came from les portes st. georges in canada, i made the feet with aspire, sorry i noted that on my vectric post,

    But i am willing to learn!!! think we could do it?

    jim

    James McGrew CAMaster 508 ATC
    www.mcgrewwoodwork.com http://dropc.am/p/EJaKyl


  9. #9
    Member cabnet636's Avatar
    Join Date
    Oct 2007
    Location
    usa
    Posts
    2466
    Downloads
    0
    Uploads
    0

    Default

    installed

    Attached Thumbnails Attached Thumbnails aspire,  vcarve pro-img_2961-jpg   aspire,  vcarve pro-img_2960-jpg  
    James McGrew CAMaster 508 ATC
    www.mcgrewwoodwork.com http://dropc.am/p/EJaKyl


  10. #10
    Registered
    Join Date
    Jan 2006
    Location
    New Zealand
    Posts
    509
    Downloads
    0
    Uploads
    0

    Default

    Looks amazing, sure beats cutting all that detail by hand with a hammer and chisel

    Shannon.



  11. #11
    Member ger21's Avatar
    Join Date
    Mar 2003
    Location
    Shelby Township
    Posts
    35538
    Downloads
    1
    Uploads
    0

    Default

    Quote Originally Posted by Big S View Post
    Looks amazing, sure beats cutting all that detail by hand with a hammer and chisel

    Shannon.
    And the years of practice that would take.

    Gerry

    UCCNC 2017 Screenset
    [URL]http://www.thecncwoodworker.com/2017.html[/URL]

    Mach3 2010 Screenset
    [URL]http://www.thecncwoodworker.com/2010.html[/URL]

    JointCAM - CNC Dovetails & Box Joints
    [URL]http://www.g-forcecnc.com/jointcam.html[/URL]

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  12. #12
    Member cabnet636's Avatar
    Join Date
    Oct 2007
    Location
    usa
    Posts
    2466
    Downloads
    0
    Uploads
    0

    Default

    i gotta cop to the easy way out! the biggest dilema is learning to use the software at this point. i will say it is helpfull in the competetive arena as my now non cnc competitors (whats left of them after the last few months in this economy) are still purchasing appliques and onlays at a fairly decent expence and i have the ability to configure what the customer wants and produce it at a reasonable cost. several shops are peeking in at what i am doing now and asking more questions about cnc.

    i had a disscussion with a fellow at IWF who came across as a real closed minded sort of guy, he was asking "what will happen when cnc is the accepted standard in cabinetmaking and everyone would have one"?

    i asked him "do you want to be first or last"

    thanks for the compliments fellows but honestly i learn it here, and gerry you were a beta testor on a product that will step me up and is exactly what i wanted and waited for from the time i first saw the carvewright software and told them turkeys to make it available for gcode or conventional cnc use, to you i tip my hat, i have always been in woodworking to make money, being in magazines and such can be fun but i learned a long time ago, design it, sell it, deliver it, get your money and do not fall in love with it, artist starve!!!



    jim

    James McGrew CAMaster 508 ATC
    www.mcgrewwoodwork.com http://dropc.am/p/EJaKyl


  13. #13
    Member Khalid's Avatar
    Join Date
    Apr 2006
    Location
    Pakistan
    Posts
    3498
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by cabnet636 View Post
    i have always been in woodworking to make money, being in magazines and such can be fun but i learned a long time ago, design it, sell it, deliver it, get your money and do not fall in love with it, artist starve!!!

    jim
    Very very nice saying... especially the last one.. i really fell in love with wood carving...and u are right don't fell inlove, artist starve...

    Can u please tell us in which magazines u were /are in????

    regards

    Last edited by Khalid; 11-27-2008 at 12:48 PM. Reason: spells


  14. #14
    Member cabnet636's Avatar
    Join Date
    Oct 2007
    Location
    usa
    Posts
    2466
    Downloads
    0
    Uploads
    0

    Default

    we have been in cabinetmaker, our work in homes has been in regional design magazines many times like south carolina homes and gardens and regional newspapers,

    thanks for asking

    jim

    James McGrew CAMaster 508 ATC
    www.mcgrewwoodwork.com http://dropc.am/p/EJaKyl


  15. #15
    Member cabnet636's Avatar
    Join Date
    Oct 2007
    Location
    usa
    Posts
    2466
    Downloads
    0
    Uploads
    0

    Default 3d and nesting aspire

    shannon vectric has upgrades the program to include a few new featuresa and true shape nesting

    the demos are on the site www.vectric.com

    jim

    James McGrew CAMaster 508 ATC
    www.mcgrewwoodwork.com http://dropc.am/p/EJaKyl


  16. #16
    Registered
    Join Date
    Jan 2006
    Location
    New Zealand
    Posts
    509
    Downloads
    0
    Uploads
    0

    Default

    I have got the free upgrade already as I had purchased Vcarve less than a year ago.

    The new features look great.

    Shannon.



  17. #17
    Member cabnet636's Avatar
    Join Date
    Oct 2007
    Location
    usa
    Posts
    2466
    Downloads
    0
    Uploads
    0

    Default

    get a load of this

    Attached Thumbnails Attached Thumbnails aspire,  vcarve pro-bishop2-jpg  
    James McGrew CAMaster 508 ATC
    www.mcgrewwoodwork.com http://dropc.am/p/EJaKyl


  18. #18
    Registered
    Join Date
    Jan 2006
    Location
    New Zealand
    Posts
    509
    Downloads
    0
    Uploads
    0

    Default

    Looks good, was that from a 2d image?

    I should mention that the new Vcarve pro is what I have now, it also has autonesting and a few other cool features.

    I may consider getting aspire at a later date but I haven't really had any work that requires it yet.

    Shannon.



  19. #19
    Member cabnet636's Avatar
    Join Date
    Oct 2007
    Location
    usa
    Posts
    2466
    Downloads
    0
    Uploads
    0

    Default

    this is a scan intended to be 70 inches tall and life size when completed, guy matthews of new wave woodworking in NY deserves all credit for the scanning and file he is truley a master at this, i will machine this into a full size human scale chess set

    jim

    Attached Thumbnails Attached Thumbnails aspire,  vcarve pro-img_2430-jpg   aspire,  vcarve pro-img_3763-jpg   aspire,  vcarve pro-img_3778-jpg  
    James McGrew CAMaster 508 ATC
    www.mcgrewwoodwork.com http://dropc.am/p/EJaKyl


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

aspire,  vcarve pro

aspire,  vcarve pro