Reply with QuoteWith an $80K budget, I'd think you might be able to possibly look at the big manufacturers, Holz-Her, Biesse, Busselato.... Be sure to do a LOT of research, though. Salesman don't usually give you the whole picture.
solid surface cnc choice
Any suggestions on a good entry level 3 axis machine for solid surface. I want to spent about 40-80,000. My old scm is to unpredictable to base this much work on it going the distence. I want to process plywood on it as well and need some customer support as it needs to be on line immidiatly. Thanks for any advice.
Similar Threads:
With an $80K budget, I'd think you might be able to possibly look at the big manufacturers, Holz-Her, Biesse, Busselato.... Be sure to do a LOT of research, though. Salesman don't usually give you the whole picture.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
