I have this software if you still need it...
my new chinese CNC machine just arrived,
it is controlled with a DSP-controller (RZNC 0510),
but in the package, the software CD was missing,
can someone who has the same DSP controller please email me a copy of the software?
I would be very grateful,
Ben
Similar Threads:
I have this software if you still need it...
the RZNC 0501 software should have some special parameter inside to compatible with your special machine.
jenny@wklaser.com
skype:ms.leizhang www.wklaser.com
New link as the other no longer works:
www.blackcatcutters.com/RZDSP/RZDSPFileSet.zip
hello if you got that soft ware i could use a copied of it if u could ....thank u
hello if you got that soft ware i could use a copied of it if u could ....thank u
Both links work now.
rznc401 dsp controller rzncd5416/32/3/l1-4.111 zhb162 its is on a xhyz1224-1 table built in 2005 i try the links but it is not seeing it..any one have a driver for this one ,,or should i just give up an put a mach 3 set up on it
Hi masters!
I am writing from Portugal, and im the owner of a Suda 1325 cnc.
Unfortunatly im not able to read the usb pen with the RZNC-0501 controller
Both my versions are:
RZNC-D5416/3/ L7
1.2 (HGQ692)
20288
Is there any update fo it?
Do you know any reason why my controller is not receiving/reading the usb files?
I go through the controller menu, i pick the "u disk file", apparently it tries to read (usb pen light flashes) but is not showing the files of the usb. I thought it might be from a bad usb pen, i tried with a new one, and nothing...
I also tried to connect the controller to my PC, but i'm stalled by a "not recognized usb..." message. I am running windows 8, and not even picking the controler files manually it recognizes the controller, and therefore im not able to run nothing...
Its strange because the controller is working well, and controls the machine.
Any clue/suggestion?
I have the same problem.
What did you do to solve the problem?
Thanks
Hi Shapebuster,
I have the same problem.
What did you do to solve the problem?
Thanks
I CAN READ 8 GIGAS 4 GIGAS
ES POSIBLE OPEN HOW *.TXT
Dear sir
please i need this pc software for RZNC 501
Best regards
ahmed
I have problém with Richauto A11, I need setup file for emergency situation, probably file *. PKG. Normal loading stops on "loading 32 %" Help me anybody. Thanks.
if you software is lost then used Vcarve
you need setup machine , sensors and parameters automatic DSP contol i do it
Thanks, I'll try it.
please i need dsp controller RZNC 0501 software