| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Colchester Tornado lathes Discuss Colchester Tornado lathes here |
| | |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
02-02-2011, 11:03 AM
| |||
| |||
Hey everyone, I have a colchester clausing storm 300 lathe, when commanded to stop the spindle takes about a minute to wind down to a complete stop compared to the couple seconds it use to take. M05, M30, M00, E-stop, Reset tried them all, same result. Anyone ever have this issue?  |
|
#2
02-02-2011, 11:19 PM
| |||
| |||
| If you have a manual on the perameters there should be a perameter for startup and slow down time. |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Need help with M05. spindle does not stop | jessebpm | Hyundai Kia machine | 0 | 04-27-2010 01:10 PM |
| e stop and spindle (on/off) | Zygoat | LinuxCNC (formerly EMC2) | 3 | 03-09-2010 09:43 PM |
| Problem- spindle won't stop | HBFixedGear | Fadal | 4 | 07-07-2009 04:30 PM |
| How can I stop the spindle ? | tmead | Mach Wizards, Macros, & Addons | 6 | 03-31-2009 10:50 PM |
| VMC-15: Spindle Would Not Stop ! | StormWerkz | Fadal | 8 | 04-25-2007 11:30 AM |
| | |
Linear Mode
